The Health Effects of 3D Printing
Basic steps you can take to protect your patrons and staff
As makerspaces and fab labs increase in
popularity, more and more libraries are adding 3D-printing capabilities. According
to a 2015
American Library Association (ALA) report, 428 public library
branches have made this technology available. Some potential issues of 3D
printing, such as the threat of printing weapons and copyrighted works, are
often considered. However, discussion of the health hazards associated with 3D
printing is rare.
Ultrafine particles and volatile organic compounds
Several studies have shown that 3D
printers produce high amounts of ultrafine particles (UFPs) and volatile
organic compounds (VOCs) while in use, and that these particles and vapors are
detectable for many hours after the printers have been shut off. UFPs have been
linked to adverse health conditions, such as asthma and cardiovascular issues,
because they can pass through the lungs and travel to other organs. They can
also transfer toxic material into the body, including blood and tissue cells.
The US Environmental Protection Administration has classified many VOCs as
toxic air pollutants. Exposure to certain VOCs, such as benzene and methylene
chloride, has been linked to cancer.
UFPs and VOCs are produced by thermal
decomposition when a 3D printer heats and melts a plastic filament. The most
popular filaments used in 3D printing are acrylonitrile-butadiene-styrene (ABS)
and polylactic-acid (PLA) filaments. Brent Stephens conducted one of the first
studies on desktop 3D printer UFP and VOC emissions in 2013 in the journal Atmospheric
Environment. Since then, several other studies have
tested 3D printers, using both ABS and PLA filaments. Most of the studies were
conducted with low-cost 3D desktop printers, the kind that libraries are most
likely to purchase. The studies concluded:
- 3D printing raises the levels of UFPs dramatically in the printer’s area of operation.
- Low-cost desktop 3D printers and filaments may produce higher amounts of UFPs and VOCs than more expensive brands.
- ABS filaments produce more particle emissions than PLA filaments.
- Even with an enclosure, nonventilated 3D printers only see a small reduction in UFP emissions.
- The carcinogen styrene is produced by ABS filament heating.
- The hazardous chemical methyl methacrylate is produced by PLA filament heating.
- As a 3D printer ages it produces higher emissions of UFPs and VOCs.
All of the studies concluded that 3D printers
should be placed in well-ventilated areas to limit exposure to UFPs and VOCs.
Some 3D printers have built-in ventilation systems; libraries should purchase
these over nonventilated, less expensive versions.
ABS and PLA food safety
The main food safety concern with 3D printers
is bacterial growth due to small fissures in printed objects. Items made by 3D
printers are porous, allowing bacteria to grow over time and to potentially
become a health hazard. Also, children playing with 3D-printed objects run the
risk of coming into contact with bacteria growing on the object after it has
become soiled. Cleaning the object might prove difficult because high
dishwasher temperatures can melt or warp the item (especially with PLA-printed
objects). Some filaments (other than ABS and PLA) are food safe, including
polyethylene terephthalate (PET), which has been FDA
approved for direct food contact.
ABS-created plates, cups, and utensils can
transfer dangerous chemical residues, including 1,3-butadiene, a probable human
carcinogen that can cause irritation to skin and mucous membranes through
contact with food. Also, UFPs and other residues from the 3D printing process
could still be on the printed material. These levels are small but should still
be of concern to those using 3D-printed material as dinnerware.
As new studies are conducted, we will continue
to learn more about the hazards of using this technology, as well as the ways
we can protect ourselves and our patrons from short- or long-term health
effects. Until additional data is available, library staffers should do the
following to reduce their exposure to UFPs and VOCs:
- Use 3D printers with either built-in ventilation or in well-ventilated areas.
- Keep patrons from up-close monitoring of printing activity for long periods.
- Carefully consider the risks associated with the type of plastic filament used in devices.
- Restrict patrons’ printing of items that could be used around food, such as utensils and plates.
- Follow manufacturer’s instructions.
Libraries or any public space providing or
considering 3D-printing services should evaluate their space and printing
policies to ensure this technology is used as safely as possible. Free safety
consulting programs are available through many state workers’ compensation
systems.
Regards
Pralhad Jadhav
Senior Manager @ Library
Khaitan & Co
No comments:
Post a Comment